Brainboxes ES-020 Manual descargar pdf (Pagina 17)

ES Range Product Manual

Version 2.8

Page 17 of 57

7. Advanced Configuration

IP Addressing

 The IP settings can be easily changed by clicking the “Change” link available in the “Device

Info” section on the left hand panel of Boost.LAN Manager.

 This will bring up the following dialogue box.

 As mentioned in the “Features” section of this manual, the ES device is shipped in DHCP

Mode. On connecting to the network, the device automatically checks if it is connected to a

DHCP Server. If this is the case, the DHCP server will allocate an IP address automatically to

the ES device.

 If no DHCP Server is detected within 60 seconds (e.g. you are using a direct cable connection

to the PC), the ES device will default to the IP address specified in the static IP Settings as

shown above. By default, this is 192.168.127.254.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 56 57

Sin comentarios

Brainboxes ES-020 Manual Pagina 17