Brainboxes BL BL-830 Manual de usuario descargar pdf (Pagina 39)

Manual for BL-819, BL-830, BL-875

12. Troubleshooting

In the rare occasion that you experience difficulties using this product, please read the following suggestions from

the table below before contacting our support team.

Problem Description Solution

Data doesn’t seem to be

received by the product, but

seems to be sent by it (e.g. data

only travelling in one direction)

This is normally the result of the

product being configured as requiring

RTS/CTS handshaking, but being

plugged into a device which does not

support it.

Switch off the RTS/CTS handshaking by

putting the device into upgrade mode

and using the Upgrade Wizard

Interaction with the menu

appears slow and unresponsive,

but data does show eventually.

This is normal operation when the

product is in Client mode. The

product is using most of its processor

cycles to try and find and connect to

a remote device.

Reconfigure the product to Server mode

whilst attempting to configure other

options

Cannot interact with the menu There are a number of scenarios

where this might happen…

1. A Bluetooth connection is made

2. The Product has failed to initialise

correctly (perhaps if the power

adapter has been attached whilst

switched on).

3. Incorrect communication

parameters selection.

4. Incorrect Wiring configuration

1. No interaction with the menu is

possible when a Bluetooth connection is

present. Break the connection to restore

access to the menu.

2. Switch the power off then on again.

3. Change the communication settings

in your terminal application to match

those of the devices settings. If you

have forgotten or lost these settings,

then the device can be restored to its

factory settings by performing a long

reset. Check your devices wiring and

handshake configuration requirements

Firmware upgrade (DFU Wizard)

fails

1. Product not connected

2. Product not configured for upgrade

1. Connect your Adapter to a suitable

port on your PC and connect the power.

2. Follow instructions in above sections

for preparing for upgrade

Can’t connect to iPhone, iPad,

iPod

Cannot establish a connection to an

Apple product

Brainboxes Bluetooth products do not

work with Apple products as Apple’s

products do not support the Serial Port

Profile (SPP) needed for communication

I do not know what pins to

connect my hardware to

Many users are unsure which pins of

the BL device they are using are

used to connect to their hardware

A picture of the BL pinouts is located

here:

http://www.brainboxes.com/product/item

s/bl-819

The pins are the same for the BL-

819/830/875

1 2 ... 34 35 36 37 38 39 40 41 42

Comentarios a estos manuales

Sin comentarios

Brainboxes BL BL-830 Manual de usuario Pagina 39

Comentarios a estos manuales